· C - Screwdriver operated cam latch

This latch is the most common on access panels, providing easy access in standard applications. This latch is not available on fire rated panels

· L - Key operated cylinder lock

This latch is the most common on access panels, providing easy access in standard applications. This latch is not available on fire rated panels

· M - Mortise cylinder lock preparation

The mortise preparation provides a higher level of security than the 'L' style lock. The locks can be matched to the project hardware. Cierra's doors accept a standard 1-1/8" mortise cylinder by most lock manufacturers (Best, Corbin, Russwin, Schlage, etc.).

· H - Hex head cam latch

This latch requires a standard allen wrench to open the door, providing a higher level of security than a screwdriver latch. This latch is not available on fire rated panels.

· P - Pinned hex head cam latch

For more secure applications, the pinned hex head cam latch allows tamperproof access. The latch requires a special pinned allen wrench to open the door. This latch is not available on fire rated panels.

· S - Security screw - Pinned hex head

Security screws allow the highest level of security without a lock cylinder. A special pinned allen wrench is required to open the door (sold separately). This latch is not available on fire rated panels.

· D - Detention lock preparation

The detention lock preparation will accommodate several brands of heavy-duty detention deadbolt locks. The most common use for this option is in maximum security applications.

· B - Best 5E series cam lock prep

This option is an economical solution for matching a Best
locking system by preparing to receive a 5E cam lock.

· N - Knurled knob cam latch

The knurled knob latch is finger operated, so it provides unrestricted access for times when using a tool or key to open the panel is not desired. This latch is not available on fire rated panels.

· C - Drip cap on frame

The drip cap is mounted on the upper horizontal frame, and directs running water away from the face of the door to assist with weather resistance. This option is not available on fire rated panels.

· B - Galvanized bonderized steel

This material is an economical choice for use where a corrosion resistant material is required.

· S - Stainless steel type #304

With #4 satin polish finish. Stainless steel material is typically used in areas that require the highest level of corrosion resistance. It is also used in areas where a polished stainless steel look is desired.

· D - Double leaf access door

When you need access to large openings, we recommend double leaf doors for ease of use.

· C - Drip cap on frame

The drip cap is mounted on the upper horizontal frame, and directs running water away from the face of the door to assist with weather resistance. This option is not available on fire rated panels.

· G - Gasketing

Gasketing can be applied to the doorstops of the frame to provide weather resistance and reduce airflow between the door and frame. A UL listed smoke seal gasket is also available.

· H - Continuous piano hinge

Occasionally, a flush piano style hinge is required on access panels for specification compliance.

· L - Louvered door

Some access door styles can be manufactured with a louvered door to provide ventilation in special applications. This option is not available on fire rated panels.

· M - Masonry anchors

Masonry anchors secure the panel when installed in masonry.

· Z - Concealed continuous piano hinge

This hinge option provides added security while maintaining an appealing appearance. This hinge is not available on fire rated panels.