| |
|
|
|
|
 |
Frames
|
|
Stainless Steel - Level Bed
|
|
Level bed frames allow grates to rest directly on the recessed concrete providing a smooth transition.
• Frames depths vary to accommodate the specific grate or mat dimensions
• 3” block out recommended for installation
• Rails are made from Stainless Steel |
 |
|
 |
|
SS-38SF |
• For use with the eleGRIL® Stainless Steel SS-38SF Grate
• 9/16"" (14.3MM) deep by 1/8"" (3.2MM) profile
|
|
|
|
|
 |
|
SS-58SF |
• For use with the eleGRIL® Stainless Steel SS-58SF Grate
• 3/4" (19.1MM) deep by 1/8" (3.2MM) profile
|
|
|
|
|
 |
|
SS-98SFLB |
• For use with the eleGRIL® Stainless Steel SS-98G Grate
• 1-1/4" (31.8MM) deep by 1/8" (3.2MM) profile
|
|
|
|
|
Stainless Steel - Deep Pit
|
|
|
|
|
|
|
SS-98SF |
• Stainless Steel Deep pit frame for use with the eleGRIL® Stainless Steel SS-98G Grate
• Allows the grate to span collection basins or sloped recesses for drains in limited depth applications
• The frame supports the edges and adjustable cross support
• Cross supports provide even support though the grate.
• 3” horizontal and 3” vertical block out recommended for installation
• Rails are made with Stainless Steel
• 1-1/4" (31.MM) deep by 1/8" (3.2MM) profile
|
|
|
|
|
Aluminum - Cast In Place - Level Bed Frames |
|
• Level bed frames allow grates to rest directly on the recessed concrete providing a smooth transition
• Frames depths vary to accommodate the specific grate or mat dimensions
• 3” block out recommended for installation
• Rails are made from 6063-T52 Aluminum alloy extrusions |
|
|
 |
|
F-1 |
• For use with all 1-3/4"" (44.5MM) grates
• Frame is 1-15/16 (49.2MM) deep by 1/2" (12.7MM) profile
|
|
|
|
|
 |
|
F-11 |
• For use with the GrateDesign® Roll-up Grates and envIRONtread® II G-218 series Rigid Grates
• 1-3/8 (34.9MM) deep by 1/2" (12.7MM) profile
|
|
|
|
|
 |
|
F-13 |
• For use with the envIRONtread® II Rigid Grates G-212 series
• 1-1/16 (27MM) deep by 1/8"" (3.2MM) profile
|
|
|
|
|
 |
|
F-3 |
• For use with the MatDesign™, QuietFlex® and ScrapesGrate® M-675 mats
• 1-3/8” deep by ½” profile
|
|
|
|
|
 |
|
F-7 |
• For use with the eleGRIL® SS-58G grate
• 1-3/16 (30.2MM) deep by 1/8"" (3.2MM) profile
|
|
|
|
|
 |
|
F-8 |
• For use with the eleGRIL® SS-98G grate
• 1-11/16 (42.9MM) deep by 1/8"" (3.2MM) profile
|
|
|
|
|
Aluminum - Cast In Place - Deep Pit Frames |
|
• Allow grate to span collection basins or sloped recesses for drains in limited depth applications
• The frame supports the edges and adjustable cross support
• Cross supports provide even support though the grate
• 3” horizontal and 3” vertical block out recommended for installation
• Rails are made from 6063-T52 Aluminum alloy extrusions |
|
|
 |
|
F-2C |
• Deep Pit frame for use with all 1 ¾” grates
• 4-1/4” (108MM) deep by ½” (12.7MM) profile
|
|
|
|
|
 |
|
F-2T |
• Thin slab frame for use with all 1¾” grates
• 3” (76.2MM) deep by ½” (12.7MM) profile
|
|
|
|
|
Aluminum - Tapered Angle |
|
• Used when field conditions prevent the use of a frame that requires a large block out for installation
• Rails are made from 6063-T52 Aluminum alloy extrusions |
|
|
 |
|
F-Lang |
• For use with all 1¾" (44.5MM) grates
• 1¾" (44.5MM) deep by 1/8"" (3.2MM) profile
|
|
|
|
|
 |
|
F-14 |
• For use with the GrateDesign® Roll-up Grates envIRONtread® II G-218 series Rigid Grates
•
¾" (19.1MM) deep by 1/8"" (3.2MM)
|
|
|
|
|
 |
|
F-6 |
• For use with the MatDesign™, QuietFlex® and ScrapesGrate® M-675 mats
• 7/16” deep by 1/8” profile
|
|
|
|
|
Aluminum - Fastened Angled Frame
|
|
• Used when field conditions prevent the use of a frame that requires a large block out for installation
• Rails are made from 6063-T52 Aluminum alloy extrusions |
|
|
 |
|
F-10 |
• For use with the envIRONtread® Roll-up Grate G-275
• 1" (25.4MM) deep by 1/8" (3.2MM) profile
|
|
|
|
|
 |
|
F-9 |
• For use with the envIRONtread® Roll-up Mat and envIRONtread® II G-212 Series
• 5/8" (15.9MM) deep by 1/8" (3.2MM) profile
|
|
|
|
|
Aluminum - Surface Mount
|
|
• Frames for surface mounted, permanent installation
• Surface mount frames are ADA compliant when installed correctly
• Rails are made from 6063-T52 Aluminum alloy extrusions |
|
|
|
|
F-12 |
• For use with envIRONtread® II Rigid Grates G-212, EnvIRONtread® Roll-up Mats M-775 and eleGRIL® Stainless Steel Grates SS-38G
• 15/32" (11.9MM) deep by 1-5/8" (41.3MM) profile
|
|
|
|
|
|
|
F-4 |
• For use with the MatDesign™, QuietFlex® and ScrapesGrate® M-675 mats
• 3/8" (9.5MM) deep by 1-5/8" (41.3MM) profile
|
|
|
|
|
Aluminum - Mat Attached
|
|
• Used when field conditions prevent the use of a frame that requires a large block out for installation
• Rails are made from 6063-T52 Aluminum alloy extrusions |
|
|
 |
|
F-5 |
• Frames for surface mounted on roll-up mats to create a permanent installation
• Surface mount frames are ADA compliant when installed correctly
• Rails are made from serrated flexible vinyl
• 3/8"" (9.5MM) deep by 1-5/8"" (41.3MM) profile
|
|
|
|
|
|
Babcock-Davis9300 73rd Avenue N.
Brooklyn Park, MN
55428
Phone:
Local
763-488-9247
Toll Free
888-412-3726
Fax:
Local
763-488-9248
Toll Free
888-312-3726
|
|
|
|
Commercial Building Products
©2012 Babcock Davis, Inc.
9300 73rd Avenue N.
Brooklyn Park, MN 55428
|
|
|
|
Access Doors
Entrance Flooring Systems
